Product Manual WDC400
Wallgate
2014
17
|Revision 3.0
Item number
Description
Function
CON 7
Output to Valve
WC Flush Valve
CON 8
Output to Valve
Shower valve
CON 9
Output to Valve
Basin Cold Water Valve
CON 10
Output to Lighting
Basin Hot Water Valve
CON 11
Output to Lighting
External Cell Call Light
CON 12
Input from control
Internal Cell Call Button
SKT21
Input from control
Main Light Internal Switch
SKT22
Input from control
Shower Light Internal Switch
SKT23
Input from control
Main Light External Switch
SKT24
Input from control
Shower Light External Switch
SKT25
Optional input
Auxillary14
SKT26
Optional input
Auxillary15
SKT27
Optional input
Auxillary16
SKT28
Input from control
Check Light External Switch
Comms IN
Left RJ45 Socket
Ethernet Input
.
The input and output RJ45 connectors are
used to manage the WDC400 through an
existing Building Management System (BMS)
or stand alone system (WDCMS).
You can control and monitor:
Individual cell/room isolation for water
and electrical power.
Remote, individual and group operation
and settings, RTC settings.
Real time status feedback from cell/room
Control Units.
Comms OUT
Right RJ45 Socket
Ethernet Output
There are three types of sockets in the WDC400 control unit:
Twelve 3 pin female sockets, to connect the unit to 8 solenoid valves and 4 cell call
lights. The 8 sockets are used to connect the water valve solenoids, two sockets for
the WC flush valves, four for the wash basin valves and two for the shower control
valves.
Twenty eight 3.5 mm female sockets, to connect the unit to the pushbuttons,
optional remote controls and lighting switches.
Two RJ45 connectors, to connect the control unit to an Ethernet network.
