Wallenstein FX110R Operator'S Manual Download Page 7

Page: 7 / 50

FX66, FX85/R, FX110/R, FX140/R

PTO Skidding Winch

Foreword

1.5 Decal Information

When getting familiar with the Wallenstein product,

notice that there are numerous decals located on the

machine. There are different types of decals for safety,

information, and product identification. The following

section explains what they are for and how to read

them.

Safety Decals

are pictorial with a yellow background

and generally two panel. The top panel shows the

safety alert (the potential hazard) and the bottom panel

shows the message (how to avoid the hazard).

Potential

Hazard

How

Hazard is

Avoided

Safety Notice Decals

are pictorial with a blue

background and generally rectangular with single or

multiple symbols. This decal informs what Personal

Protective Equipment is required for safe operation.

Informative Decals

are generally pictorial with a white

background and can vary in the number of panels. This

type of decal explains the operation of a control.

Product Decals

indicate machine model and serial

number, and other important information.

See the section on safety signs for safety decal

definitions. For a complete illustration of decals and

decal locations, download the parts manual for your

model product at

www.wallensteinequipment.com.

Summary of Contents for FX110R



















































Search results

Summary of Contents for FX110R

Reviews:

Related manuals for FX110R

Brands by name

Popular brands

Wallenstein FX110R, Operator'S Manual

Search results

Summary of Contents for FX110R

Reviews:

Related manuals for FX110R

Brands by name

Popular brands