Wallenstein FX110R Operator'S Manual Download

Page: 4 / 50

Foreword

FX66, FX85/R, FX110/R, FX140/R

PTO Skidding Winch

WALLENSTEIN

FX Series Skidding Winch

This form must be filled out by the dealer and signed by both the dealer and the customer at the time of delivery.

To activate warranty, register your product online at

http://www.wallensteinequipment.com

_________________________________________

Customer’s Name

_________________________________________

Contact Name

_________________________________________

Dealer Name

(_________)_______________________________

Phone Number

_________________________________________

Serial Number

__________ /__________ /__________

Delivery Date (dd/mm/yy)

I have thoroughly instructed the buyer on the equip

ment care, adjustments, safe operation and applicable

warranty policy and reviewed the manuals.

_________________________________________

Dealer’s Rep. Signature

__________ /__________ /__________

Delivery Date (dd/mm/yy)

The product manuals have been received by me and

I have been thoroughly instructed as to care, adjust

ments, safe operation and applicable warranty policy.

_________________________________________

Owner's Signature

__________ /__________ /__________

Delivery Date (dd/mm/yy)

1.2 Delivery Inspection Report

Pre-delivery Inspection

Inspect for damage from shipping. Immediately

contact the shipping company if damage is found.
All FX Series

Check Condition of Cable
Drive Chain Tension Checked

PTO Shaft Telescopes, Shield Turns, and is

Greased
Fasteners Tight

Grease Zerks / Pivot Points Lubricated

Clutch Rope Moves Freely

Brake Rope Moves Freely

FX85R, FX110R, FX140R

Remote Control Functions Correctly
Clutch Hydraulic Cylinder Functions

Check Electrical Power Connections
Check Wiring Connections

Safety Checks

All Safety Decals Installed
Guards and Shields Installed and Secured
Retainer Installed Through Mounting Pins
Review Operating and Safety Instructions

Summary of Contents for FX110R



















































Search results

Summary of Contents for FX110R

Reviews:

Related manuals for FX110R

Brands by name

Popular brands

Wallenstein FX110R, Operator'S Manual

Search results

Summary of Contents for FX110R

Reviews:

Related manuals for FX110R

Brands by name

Popular brands