Wallenstein FX110R, Operator'S Manual

Page: 18 / 50

Familiarization
FX66, FX85/R, FX110/R, FX140/R
PTO Skidding Winch
18
3. Familiarization
IMPORTANT! Before starting work with the
winch, become familiar with the location and
function of all controls.
3.1 To the New Operator
It is the responsibility of the owner or operator to read
this manual and to train all other operators before
they start working with the machine. Follow all safety
instructions exactly.
By following recommended procedures, a safe working
environment is provided for the operator, bystanders
and the area around the work site. Untrained operators
are not qualified to use the machine.
3.2 Operator Orientation
IMPORTANT! When describing controls as
mentioned throughout this manual, the directions
for left-hand, right-hand, backward and forward,
are determined when sitting in the tractor seat,
facing the direction of forward travel.
Fig. 4 – Direction of forward travel
3.3 Training
Each operator must be trained in the proper set-up and
operating procedures prior to being allowed to operate
the machine.
1. Review control location, function and movement
directions.
2.
Move the unit to a large open area to allow the
operator to become familiar with control function
and machine response.
3. When a new operator is familiar and comfortable
with the machine, they can proceed with the
work. Do not allow untrained operators to use the
machine. They can endanger themselves and
others or damage property and the machine.
3.4 Job Site Familiarization
It is the responsibility of the operator to be thoroughly
familiar with the work site prior to starting. Prevent
the chance or possibility of problems or accidents by
not being in the situation to start with. Some items the
operators should check include but are not limited to:
1.
Close or cramped work space. Be sure there is
sufficient space and clearance for the machine to
winch-in the log during operation.
2. Organize the working area to minimize the
winching and wood removal distances. The shorter
the distances, the faster the work will be finished.
3. Use care when pulling logs from a pile as they can
roll when attaching the rope or winching.
4. Position the tractor so prevailing winds blow engine
exhaust fumes away from operator.