41
BXTR6438
STORAGE SAFETY
• Store the chipper in an area away from hu
-
man activity.
• Do not permit children to play on or around
the stored machine.
• Replace any missing or unreadable safety
decals.
• Allow machine to cool before covering or stor
-
ing in an enclosure.
4.11 Storage
After the season's use or when the machine
will not be used for a period of time, completely
inspect all major systems of the BXTR6438 Trailer
Wood Chipper. Replace or repair any worn or
damaged components to prevent any unnec
-
essary down time at the beginning of the next
season.
Follow this procedure before storing:
1. Review the engine owners manual concerning
storage preparations.
2. Add fuel stabilizer to the fuel tank. Operate
the engine for a few minutes to let fuel cycle
through the system.
3. Remove ignition key and store in a secure
place.
4. Remove the battery and store it in a cool,
dry area that won't freeze. Connect a battery
maintainer to keep it at full charge.
4.11.1 Placing in Storage
5. Inspect all rotating parts for entangled mate
-
rial. Remove all entangled material.
6. Remove all remaining material and debris
from the machine.
7. Thoroughly wash the machine with a pressure
washer or water hose to remove all dirt, mud
or debris.
8. Check the condition of the belts and pulleys.
Replace or adjust as required.
9. Move the feed table up and secure, and rotate
the discharge chute towards the engine.
10. Secure chipper components including:
•
tool and tank doors - latched.
•
belt access covers, and shields - bolted.
•
rotor housing - bolted.
•
raise the feed table - latched.
11. Touch up all paint nicks and scratches to
prevent rusting.
12. Do not allow children to play around the
stored chipper.
13. Store in an area away from human activity.
14. It is best to store the machine inside. If that is
not possible, cover with a waterproof tarpaulin
and tie down securely.
15. To reduce the chance of condensation and
contamination, store the chipper with a full
fuel tank and treat the fuel. Run the engine
for a few minutes to make sure the treatment
gets throughout the fuel system.
4.11.2 Removing from Storage
When removing this machine from storage, follow
this procedure:
1.
Review and follow the pre-operation checklist.
2. Review safety and operation procedures.
3. Install and connect the battery.
Prepared for Storage
