33
BXTR6438
1. Use the tow vehicle to position the Wood Chip
-
per at the work site.
2. For greater stability leave your chipper attached
to the tow vehicle. The chipper can be used as
a stand alone, but be sure to chock the wheels.
3. Lower the crank jack so that the machine is
stable.
4.4 Machine Set-up
Follow this procedure to prepare and set-up the machine at the work site:
4. Open the latch on the feed table and carefully
lower the feed table.
5. Turn the discharge chute to the desired posi
-
tion and adjust the defector as required.
6. Check the battery cable and if required, con
-
nect the cable and tighten fastener securely to
ensure a good connection.
Feed Table Down
Feed Table Stowed
Caution:
Always point the
discharge chute away from
people, animals or objects. The
rotor can expel wood chips fast
enough to cause injury.
IMPORTANT
Position the machine so the pre
-
vailing wind/breeze blows the ex
-
haust gases/fumes away from the
operator's station.
