33
BXTR6438
5.2 Machine Set-up
CAUTION!
Park the machine so prevailing winds blow
exhaust gases / fumes away from the operator.
W006
CAUTION!
Risk of injury from ejected wood chips. Chipper
rotor can expel wood chips fast enough to cause
injury or damage.
Direct chute discharge away from work area,
people, animals, and objects.
W024
Follow this procedure to prepare and set-up the machine at the
work site:
1.
Use the tow vehicle to position the Wood Chipper at the
work site.
2.
For greater stability leave your chipper attached to the tow
vehicle. The chipper can be used as a stand alone, but be
sure to chock the wheels.
3.
Lower the crank jack so that the machine is stable.
4.
Open the latch on the feed table and carefully lower the feed
table.
5.
Turn the discharge chute to the desired position and adjust
the defector as required.
6.
Check the battery cable and if required, connect the cable
and tighten fastener securely to ensure a good connection.
Feed Table Down
