38
BXTR6438
10. Carefully
reach into the roller housing and remove any
debris.
11.
If required to dislodge material in or around the rotor:
very
carefully
and slowly turn the rotor by hand, remove any
jammed material.
Do not reach into the roller housing
while the rotor is moving.
12.
When all debris has been removed, lower the upper roller
housing back into position, and tighten up the housing
bolts.
13.
Close the upper rotor housing. Tighten fasteners to their
specified torque.
14.
Check that everyone is clear of machine before restarting
engine.
15.
Start the engine and resume working.
Remove jammed
material
Roller Housing
Bolts
Open upper
roller housing
Roller Housing
Lift Handle
WARNING!
Machine shown with guards removed for
illustrative purposes only. Never operate
machine with guards removed.
W001
