32
BXTR6438
5.1.2 Pre-operation Checks
Efficient and safe operation of the Wallenstein Trailer Wood
Chipper requires that each operator reads and understands the
use procedures and all related safety precautions outlined in this
section.
A Pre-operation checklist is provided for the operator. It is
important for both the personal safety and maintaining good
mechanical condition that this checklist is followed.
Before operating the Wood Chipper and each time thereafter, the
following areas should be checked off:
Area to Check
Check the machine has been lubricated
following the schedule outlined in the
Maintenance section.
Check the tension and alignment of the belts.
Adjust as required.
Check the rotor housing and discharge chute.
Remove any blockages, twine, wire or other
material that has become entangled.
Check the condition and clearance of the twig
breaker, rotor and stationary blades. Adjust or
replace as required.
Check condition of the battery and other
electrical components. Keep all components
in good condition.
Check for hydraulic leaks. Tighten
connections or replace components to stop
leaks.
Check and ensure that all covers, guards
and shields are in place, secured, and can
function as designed.
Check that all bearings are properly greased.
Replace if they do not turn freely.
Check and inspect tires, wheels, and hubs.
Check hydraulic fl uid level. Top level up as
required.
Check and tighten all fasteners. Make sure
the equipment is in good condition.
Check that appropriate equipment for
personal protection is available and being
used.
Check that jewelry, loose-fi tting clothing are
not worn. Make sure long hair is tied back.
