Wallenstein BXTR5224, Operator'S Manual, Page: 44 / 68

Service and Maintenance
BXTR5224
Trailer Wood Chipper
44
6.3 Maintenance Schedule
Perform maintenance procedures at time shown or hour
interval, whichever comes first.
As Required
Check the condition of all hydraulic lines, hoses and fittings. Replace
any that are damaged.
Visually check drive belt tension.
Remove entangled material from chipper.
Check that all fasteners are tight. Check wheel lug torque. See page
61.
Every 8 hours or Daily
Check engine oil level. See page 35
Check hydraulic oil level. See page 35
Perform Pre-operation check See page 33
Every 50 hours or Annually
Clean engine air filter See page 49
Check drive belt tension and sheave
alignment
See page 52
Check rotor blade sharpness. See page 53
Inspect hydraulic oil quality See page 35
Inspect battery See page 50
Check ledger knife sharpness See page 54
Check twig breaker See page 55
Grease entire machine See page 45
Every 100 hours or Annually
Change engine oil See engine manual
Check tire pressure See rating on tire sidewall
Change hydraulic oil filter See page 49
Change engine air filter See page 49
Clean machine. Remove debris and
entangled material.
—
Change fuel filter See page 56