Wallenstein BXTR5224, Operator'S Manual

Page: 19 / 68

BXTR5224
Trailer Wood Chipper
Familiarization
19
3. Familiarization
3.1 To the New Operator or Owner
It is the responsibility of the owner or operator to read this
manual and to train all other operators before they start
working with the machine. Follow all safety instructions.
Untrained operators are not qualified to use the machine.
1. Review control location, function and movement directions.
2. Move the unit to a large open area to allow the operator
to become familiar with control function and machine
response. When a new operator is familiar and comfortable
with the machine, they can proceed with the work.
3. Do not allow untrained operators to use the machine. They
can endanger themselves and others or damage property
and the machine.
IMPORTANT! Make sure all operators understand how to
put the machine in a safe service position before servicing
or repairing. See
page 8 .
3.2 Job Site Familiarization
It is the responsibility of the operator to be thoroughly familiar
with the work site prior to starting. Prevent the chance or
possibility of problems or accidents by avoiding unsafe
situations.
Some items operators should check include, but are not limited
to:
1. Avoid close or cramped work spaces. Be sure there is
enough space and clearance for the machine.
2. Position the machine so prevailing winds blow engine
exhaust fumes and chain saw chips away from operator's
station.
3. Choose flat and level ground and make sure the machine is
level before operating.
4. Avoid muddy or soft ground as the jacks will sink in. If
unavoidable, use boards or plates to increase the surface
area of the jack feet.
3.3 Operator Orientation
IMPORTANT! When describing controls throughout this
manual, the directions for left-hand, right-hand, backward
and forward are determined when standing at the operator
controls facing the direction of forward machine travel.
01244
Fig. 4 –
Direction of Forward Machine Travel