Wallenstein BXTR5224, Operator'S Manual

Page: 32 / 68

Controls
BXTR5224
Trailer Wood Chipper
32
4.6 Ladder Hitch Kit
(If equipped)
The Ladder Hitch provides an adjustable hitch height for the tow
vehicle.
The 2" ball coupler has three height positions and includes two,
3 ft (1 m) 1/4" safety chains with snaps.
• Lower the coupler down onto the hitch ball. Make sure the
ball clamp is under it.
• Hand-tighten the coupler by pushing down on it and turning
the hand wheel clockwise.
• Turn the hand wheel until the coupler is tight. Make sure the
hitch ball is properly seated by pushing back on the chipper.
Recheck that the hand wheel is tight.
• Check all connections at each stop. Make sure the hitch
and hitch-ball are securely attached to your tow vehicle and
that the trailer coupler is properly connected to the hitch-
ball.
00308
Fig. 27 –
Ladder Hitch Option
4.7 Clean-out Tray
(If equipped)
The Clean-out Tray is available as an add-on accessory for the
chipper. It catches fine debris under the feed rollers and prevents
it from falling out onto the ground.
With the tray closed, debris is caught inside the roller housing
saving clean-up underneath the chipper.
Empty debris out of the roller housing by pushing the Clean-out
Tray lever forward.
00309
Fig. 28 –
Clean-out Tray Lever
Fig. 29 –
View of Clean-out Tray from Underside of Chipper