G:\INSTRUCT\Sanismart Plus\Sanismart Plus Instructions.docx 9/9/2020 Page 7
Refer schematic drawings below showing how to use above mentioned various fittings
Additional items (to be arranged by installer) that may require for correct installation of unit
40mm PVC DWV pipe and fittings with suitable solvents, cleaners, glue for connecting appliances to collection tank & vent pipe.
25 mm PVC pressure pipe and fittings with suitable solvents, cleaners, glue for use as delivery pipe
Any other fittings, cables, wires, power supply, safety equipment and any other part that will be required for correct installation,
operation and maintenance of product as per these instructions, as per general engineering practice and as per NZ plumbing,
drainage & electrical regulations.
9. PROTECTION AGAINST FLOODING.
In the event of
“Liquid inflow in pump higher than unit’s capability”
or
“Mechanical failure”
or
“Unit jammed due to
foreign material”
or
“Power failure”
or
“Any pipe or valve blockage”
or
“In grace of water/moisture in the unit”
or
any
other reason in addition to ones specified above,
there is a chance that the unit
may malfunction and/or overflow, which
is not covered under warranty.
To
avoid such overflow & damage to any property or person and for health and safety
reasons
,
following steps must be followed.
Wallace pumps is in no way liable for any damages that may occurred due
to flooding.
Various Parts & Fittings provided with Sanismart Plus Pump
Schematic details of how to attach toilet
rubber pan connector to collection tank
with hose clip provided
Schematic details of how to connect
discharge rubber elbow to collection tank
with hose clips provided.
Schematic details of how to connect rubber
straight connector for additional inlet at top of
collection tank with hose clips provided
Schematic details of how to block two
side inlets of collection tank if not used
Schematic
details of how to
secure
collection tank
to floor with
parts provided
25
