24
Removing and Storage
Storing the Snowblower
1. Clean and dry the snowblower thoroughly.
2. Repaint all parts from which paint has worn.
NOTE:
Rustproofing or painting
every year
will prolong the life of the
snowblower components and moving parts.
3. Lubricate all moving parts. Apply lubricant liberally to all exposed surfaces to protect against rust.
4. List the replacement parts that will be needed before the next use.
5. Store the snowblower in a dry place.
1. Park the tractor on a level surface and lower the snowblower.
2. Remove the spring clip and clevis pin from the parallel bar at the hitch end, and remove the parallel bar
from the implement hitch.
3. Remove the linchpin from the quick hitch latch and place the hitch locking lever in the
UNLOCKED
position.
4. Start the tractor and carefully back the tractor away from the snowblower.
DO NOT engage the PTO clutch with the PTO shaft disconnected
(the
snowblower removed from the tractor).
5. Remove the PTO coupler from the tractor.
H10 and H19 Instructions
Summary of Contents for H12
Page 41: ...34 This page left intentionally blank...
Page 50: ...43 OPERATOR S NOTES...
