11
1. Grease the drive shaft spline sliding surfaces and slide the PTO coupler (tractor half) onto the shaft as
shown in Figure 2.1.
Figure 2.1: Install PTO Coupler on Drive Shaft
2. Retract the spring-loaded quick disconnect ring on the PTO Coupler and insert the Coupler Installation
Tool (provided in Owner’s Packet) as shown in the Figure 2.2.
NOTE:
The Coupler Installation Tool is provided for convenience,
but is not required for installation.
Coupler
Installation Tool
Retract Spring-Loaded
Quick Disconnect Ring
PTO Coupler
Tube
Figure 2.2: PTO Coupler Installation Tool
Installation
Summary of Contents for H12
Page 41: ...34 This page left intentionally blank...
Page 50: ...43 OPERATOR S NOTES...
