22
IMPORTANT: DO NOT
use the snowblower as a dozer blade to push snow.
Let the snowblower work its way through deep snow.
If the tractor is driven
forward into snow too fast, the snowblower may become overloaded and
clog.
When snow can be thrown to only one side of an area, use the pattern shown in Figure 3.4.
Start on the
side farthest from where the snow will be thrown.
At the end of the first pass,
rotate the blower spout
180 degrees for the return pass.
At the end of each following pass, rotate the spout 180 degrees to keep
throwing snow in the same direction.
No snow piled on this side
Snow thrown to this side only
Start Here
Finish Here
Rotate spout 180º
Rotate spout 180º
Rotate spout 180º
Figure 3.4: Throw Snow to One Side
When snow can be thrown to both sides of an area, use the pattern shown in Figure 3.5.
Start in the middle
with the blower spout directed to either the left or the right.
Drive from one end to the other in an outward
spiral without changing the position of the blower spout
to throw snow on both sides.
Snow thrown to both sides
Snow thrown to both sides
Start Here
Finish Here
Figure 3.5: Throw Snow to Both Sides
Summary of Contents for H12
Page 41: ...34 This page left intentionally blank...
Page 50: ...43 OPERATOR S NOTES...
