12
3. Insert the male quick hitch section of the implement hitch into the female socket of the snowblower as
shown in Figure 2.3 and Figure 2.4.
Female Socket
Male Hitch
Figure 2.3: Male To Female Hitch Connection
Figure 2.4: Hitch Connected To Snowblower
4. Lock the snowblower in place with the locking lever on the implement hitch: All implements must be
locked in place on the implement hitch
before beginning any operation
.
H10: Locking/Removing Implements
• Locking:
Rotate the hitch lock lever
fully forward
to the
LOCKED
position as in Figure 2.5, and
secure the hitch latch with the linch pin.
• Removing:
Remove the linch pin from the latch and move the hitch lock lever backward to the
UNLOCKED
position as in Figure 2.6.
Locking Lever
LOCKED
Linch Pin
Locking Lever
UNLOCKED
Figure 2.5: Hitch Lock Lever in “LOCKED” Position
Figure 2.6: Hitch Lock Lever in “UNLOCKED” Position
(View From Right Side of Tractor)
(View From Right Side of Tractor)
Summary of Contents for H12
Page 41: ...34 This page left intentionally blank...
Page 50: ...43 OPERATOR S NOTES...
