28
Pro Dry Instruction Manual
|
Walker Filtration
|
www.walkerfiltration.com
Section 6:
Maintenance
Figure 6.11: PD004 - PD035 - Purge plug changeout stage 1
Purge Plug Removal
Models PD004 – PD035 only
•
Remove dryer front panel.
•
Remove purge plug securing screw from the upper
valve block.
•
Remove purge plug.
•
Replace with appropriate purge plug according to inlet
pressure. Refer to Spares section, page 56
• Grease purge plug O-ring to ensure ease of fit
Appropriate purge plug selection is very important for
function of the dryer. Failure to comply with this may affect
your warranty.
1. Securing screw
2. Purge plug
Tools required
•
Pozidrive screwdriver
Figure 6.12: PD004 - PD035 - Purge plug changeout stage 2
Important information
Ensure shutdown and start-up procedures are followed prior
to carrying out any maintenance work on the dryer.
Walker Filtration will not accept responsibility for physical
injury, damage or delays caused by failure to observe the
instructions in this manual and manuals provided with your
equipment.
1
21
2
