10
Pro Dry Instruction Manual
|
Walker Filtration
|
www.walkerfiltration.com
Connecting the pre-filter to the dryer
•
PD004-PD035, Utilise O Ring and bolt supplied to
assemble filter as per figure 3.1.
• PD045-PD365, Attach pre filter utilising nipple supplied.
• Fit 4mm (5/32”) black tubing to filter and drain valve inlet.
• Pipe away condensate with 4mm (5/32”) tubing from
drain outlet. Ensure condensate is drained into an oil/
water separator.
• Fit any further filtration or ancillary equipment.
•
Drain kits supplied with dryer and comprise of the
following: Swivel elbow adapter and 4mm tubing.
All tubing should be secured up to the point of drain to
prevent whipping during discharge.
It is recommended that a bypass line including filter is
installed, as per figure 3.13
1
2
1
2
Figure 3.1: Connecting pre-filter
Mechanical Installation
Section 3:
Mechanical Installation
1. Inlet
2. Outlet
Figure 3.2: Connecting filter drain
