background image

Warranty Conditions (continued)

 

 

The buyer is responsible for promptly notifying Walinga of any defects to the equipment. The buyer is also 
responsible for making the equipment available to Walinga or its authorized repair facility for evaluation and 
repair. 

 

Prior to making any repairs or parts replacements, a warranty application and any estimated associated costs 
must be approved with the issuance of a claim number by an authorized Walinga representative. Undertaking 
any work prior to receiving warranty authorization may result in a partial or complete loss of warranty coverage.  

 

At Walinga's discretion, warranty repairs may be authorized to be completed at a repair facility convenient to the 
buyer. In such situations the estimated labour time must be approved by Walinga prior to undertaking any work. 
Labour hours will be reimbursed at the facilities posted hourly labour rate. 

 

At Walinga's request, parts in question must be returned to the nearest Walinga service facility for evaluation. In 
such situations a Returned Goods Authorization (RGA) number will be provided to the buyer. The returning 
shipment must be clearly labeled with the assigned RGA number and include a copy of the RGA form. Unless 
otherwise arranged, these parts are to be returned to Walinga within 30 days to ensure timely processing of 
your warranty claim. Failure to return such parts may result in partial or complete loss of warranty coverage.  

 

Replacement parts provided under warranty are covered for the remainder of the original equipment warranty 
period. 

 

 

Walinga reserves the right to use new, remanufactured or refurbished components when performing warranty 
repairs and replacements.  

 

Walinga is entitled to a reasonable amount of time and a reasonable number of attempts to assess the claim, 
diagnose the problem, and perform any necessary repairs. 

 

 

The warranty offered on used or refurbished equipment is limited to that specified on the purchase contract. 
Where a warranty period has not been stipulated on the purchase contract., and where such equipment is 
“used”, then such equipment is considered by Walinga to be sold “as is, where is” without the Walinga 
Warranty. Where such equipment is refurbished, then the Walinga Warranty shall apply. 

 

 

Without limitation, Walinga reserves the right to reject a warranty claim or for any one or more of the following 
reasons: 

 

The warranty claim information provided is insufficient. 

 

The product evaluation does not substantiate the claim. 

 

The unit has been operated above and beyond its capacity or not maintained or serviced properly, resulting in 
damages incurred to major components.  

 

If the unit was equipped with a factory installed hour meter which has been disconnected, altered or inoperative 
for an extended period of time; with the result being that the equipment’s operating hours cannot be verified. 

 

It is apparent that the operator’s manuals have not been followed. 

 

The equipment is not registered. 

 

Without limitation, Walinga’s Warranty does not cover:

 

 

Damage or deterioration due to lack of reasonable care or maintenance. 

 

Damage caused or affected by unapproved modifications to the equipment. 

 

Damage caused by negligence or misuse of the equipment. 

 

Damage caused by using the equipment for purposes for which it was not designed or intended. 

 

Walinga’s liability under this warranty, whether in contract or tort, is limited to the repair, replacement or adjustment of 
defective materials and workmanship. In no event will Walinga be responsible for any direct, indirect, loss of time, 
incidental or consequential expenses including, but not limited to, equipment rental expenses, towing, downtime, 
inconvenience, or any losses resulting from the inability to use the equipment. Further, Walinga shall not be liable for 
any damages or inconvenience caused by any delay in the supply or delivery of any equipment or component parts 
thereof.  
    The selling Dealer/Sales Person makes no warranty of its own and has no authority to make any representation or 
promise on behalf of Walinga, or to modify the terms or limitations of the Walinga Warranty in any way. 
    Punitive, exemplary or multiple damages may not be recovered unless applicable law prohibits their disclaimer. 
Warranty related claims may not be brought forward as a class representative, a private attorney general, a member of a 
class of claimants or in any other representative capacity. 
   The Walinga Warranty and all questions regarding its enforceability and interpretation are governed by the law of the 
country, state or province in which you purchased your Walinga equipment. The laws of some jurisdictions limit or do not 
allow the disclaimer of consequential damages. If the laws of such a jurisdiction apply to any claim against Walinga, the 
limitations and disclaimers contained here shall be to the greatest extent permitted by law. 
 

Summary of Contents for ULTRA-VEYOR SYSTEM

























































Reviews: