![background image](http://html1.mh-extra.com/html/walinga/ultra-veyor-system/ultra-veyor-system_operators-manual_3195408048.webp)
6 TROUBLE SHOOTING
The Walinga Ultra-Veyor System is a high capacity air pump. It is a simple and reliable system that requires
minimum maintenance.
In the following section, we have listed many of the problems, causes and solutions to the problems that you
may encounter.
If you encounter a problem that is difficult to solve, even after having read through this trouble shooting
section, please call your Walinga dealer. Before you call, please have this Operator's Manual and the serial
number from your Ultra-Veyor ready.
PROBLEM
CAUSE
SOLUTION
Slow discharge of material
Air leaks.
Tighten all pressure connections. Be
sure seals are in good condition.
Check hoses for leaks
Check pressure relief valve. Replace
if defective. Clear obstruction.
Defective blower.
Check clearance between lobes and
case. Excessive clearance will
decrease air flow. Consult your
dealer.
Defective airlock.
Check that tip clearance is 0.004
inches. Adjust or replace tips as
Pulsation.
required.
Not enough air flow.
Slow the amount of product falling
into the airlock.
Blower overheating.
Too many bends.
Straighten out discharge hoses.
Not enough air flow.
Slow the amount of product falling
into the airlock.
Low oil level.
Add oil as required.
Summary of Contents for ULTRA-VEYOR SYSTEM
