◦
1. Primary Separator
•
Separates the incoming product from the air stream and uses cyclonic action to
send material down to the discharge system. The product, being heavier than
air, will fall down the tank towards
the airlock.
•
55” high X 19” diameter.
•
Where gaskets are not available
use silicon to seal between
components in order to maintain
a constant vacuum.
•
The Primary Separator is bolted onto the
top of the airlock.
•
The Primary Separator is equipped with
two ports.
◦
The port on the top has a diameter of
6” and will lead to the Secondary
Separator.
◦
The suction lines connect to the 4”
side port.
Summary of Contents for Central Vac
