![background image](http://html2.mh-extra.com/html/walinga/central-vac/central-vac_installation-manual_3185958012.webp)
Piping Components
•
Aluminum tubes
•
4” aluminum tubing is the typical size of the main line of the Central Vac system.
•
3” aluminum tubing is used for the drop lines, going down towards the camlock
inlets.
•
In some applications the unit will be equipped with a 3” mainline and 2” drop
lines
•
Galvanized steel elbows
•
Used for corners in the piping
system.
•
Available in 2”,3”,4”, and 6”
•
6” elbows are utilized between
the blower, filter housing, and
separators.
•
TY's are used to connect the
inlet piping going to the main
pipe line.
•
Drop lines should never enter the main line from the bottom.
•
TY's are directional and must be installed in accordance with the air flow.
Summary of Contents for Central Vac
