![background image](http://html2.mh-extra.com/html/walinga/central-vac/central-vac_installation-manual_3185958014.webp)
•
Tube Hangers
•
Tube hangers are an effective way to hang the piping
system from the beams running along the roof.
•
Consists of a Top Beam Clamp, a rod, and a hanger
properly sized to the piping.
•
Rubber Flex Line
•
Rubber flex line is used
on the suction end of the
central vac system, and
is used for by the
operator.
•
Has a static wire built into it to prevent static electricity build up.
•
If servicing a rubber hose, ensure that the ground wire is making contact with
the coupling.
•
After the service, the installer must check the resistance by using an OHM
meter on the couplings while they are in contact with each other.
•
The conductivity of the coupling should read between 0 and 5 ohms
resistance.
•
Also available as a clear hose.
Summary of Contents for Central Vac
