Walimex Pro W1 TTL T-C Canon, Instruction Manual

Page: 46 / 52

43
Multi Mode (in the NON-GR mode)
Button
Operation Function
CH/OK
Short press
(under normal status) Enter CH settings;
(under settings) Confirm and back to normal status
Double-click Control the ON/OFF of modelling flash
Long
press for 2
seconds
Enter C.Fn custom settings
Long
press for 5
seconds
Switch the Operation Methods (Method 1/Method 2)
GR Short press (under PTH status) Set power/times/hz
MODE
Short press
(under normal status) Switch the <

Group > mode
(TTL / M / Multi)
Long
press for 2
seconds
(under PTH status) Back to normal status
Enter PTH status (T-times, and H-hz)
Select
Dial
Status Function
Normal No (3 groups)/ Turning (5 groups)
Set the
channel
Adjust the channel amount
Set the
power
Adjust the group's POWER amount
Set the flash
times
Adjust the times amount
Set the flash
frequency
Adjust the frequency amount
21701_walimex pro Funkauslöser W1 TTL T-C_BDA.indd 43 3/12/2018 1:15:17 PM