Walimex Pro W1 TTL T-C Canon, Instruction Manual

Page: 45 / 52

42
7.16 Selecting the operation method
Press the <CH/OK> Button for 5 seconds to switch the operation methods
(Method 1/Method 2).
W1 TTL T-C Operation Method 1(by default)
TTL/M Mode
Button
Operation Function
CH/OK
Short press
(under normal status) Enter CH settings;
(under settings) Confirm and back to normal status
Double-click Control the ON/OFF of modelling flash
Long press for
2 seconds
Enter C.Fn custom settings
Long press for
5 seconds
Switch the Operation Methods (Method 1/Method 2)
GR
Short press Select the POWER/FEC settings
Long press for
2 seconds
Select all the group
MODE Short press
(under normal status) Switch the <

Group > mode
(TTL/M/OFF in the GR mode; TTL/M/Multi in the
NON-GR mode)
Select
Dial
Status Function
Normal
Set the <

Group >
Set the
channel
Adjust the channel amount
Set the group Adjust the group's POWER/FEC amount
21701_walimex pro Funkauslöser W1 TTL T-C_BDA.indd 42 3/12/2018 1:15:17 PM