Walimex Pro W1 TTL T-C Canon, Instruction Manual

Page: 44 / 52

41
1. Press the <CH/OK> Button for 2 seconds or longer until <Fn> is displayed.
2. Select the custom function No.
* Turn the Select Dial to choose the Custom Function No.
3. Change the Setting.
* Press the <GR> Button until the custom function No. blinks.
* Turn the Select Dial to set the desired number. Pressing <GR> button will confirm
the settings.
* Press <MODE> button to exit the C.Fn settings.
7.14 Wireless shutter release mode
Half press the <TEST> Trigger Button to focus. Fully press the <TEST> Trigger
Button, and the Status Indicator Lamp turns red. Now camera is ready to shoot.
When releasing the button, the Status Indicator Lamp turns off.
7.15 Setting the Camera
Use the External Flash Function on the camera to do the setting.
NOTICE
1. GR mode can only be used normally when attaching to the CANON EOS ca-
meras that issued after 2012. If the camera model do not support GR grouping
flash mode, NON GR mode will be changed automatically.
2. In the NON-GR mode, Ration Off is steadily set in the TTL mode while A:B C is
steadily set in the M mode.
Flash Mode
SLOW
REAR
WL
Fill
-
flash
Flash Mode
SLOW
REAR
WL
Wireless
W1 TTL T-C cannot be triggered when the camera is set to wireless lighting mode (WL).
21701_walimex pro Funkauslöser W1 TTL T-C_BDA.indd 41 3/12/2018 1:15:17 PM