Walimex Pro W1 TTL T-C Canon, Instruction Manual

Page: 38 / 52

35
NOTICE
Min. refers to the minimum power output value that can be set in M/Multi mode.
W1 TTL T-C‘s minimum power output value is 1/128 for most of camera flashes.
However, the value can change to 1/256 when using in combination with Walimex
pro strong power flashes e.g. Flash2Go 600 TTL, etc.
7.6 Multi Flash Settings (Times & Frequency)
1. In the multi flash (TTL and M icon are not
displayed), long press the <MODE> Button
to enter multi flash setting submenu.
2. The two lines are separately displayed as T
(flash times) and H (flash frequency).
3. Short press the <GR> Button to choose the
related setting amounts. Turn the Select
Dial to change the blinking settings.
4. Continue to short press the <GR> Button,
and the blinking settings on the next line can
be changed.
5. Until all the amounts are set. Short press the <MODE> Button to exit the setting
status.
6. In the multi flash setting submenu, short press the <MODE> Button to return to
main menu.
7.7 Multi flash parameter setting
1. In the multi flash (TTL and M icon are not
displayed), short press the <GR> Button to
set the current group.
2. In multi flash mode, the power output will be
changed from Min. to 1/4.
CH
21701_walimex pro Funkauslöser W1 TTL T-C_BDA.indd 35 3/12/2018 1:15:16 PM