7
Installation
Clearances
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
* Side clearances can be 50mm when adjacent surface is at least 100mm below cooking surface.
Assembly
This model is delivered completely assembled. Ensure legs are securely attached.
NOTE:
This appliance is fitted with adjustable feet to
enable it to be positioned securely and level on
uneven floors. This should be carried out on
completion of gas connection. Refer to 'Gas
Connection Section'.
This appliance can also be fitted with rear
rollers to enable appliance to be easily moved
for positioning and cleaning purposes. If
desired, these rollers are supplied in the
packaging, with the appliance. See below for
fitting instructions.
Optional Accessories
(Refer to the Replacement Parts List)
Plinth Kit. For installation details, refer to instructions
supplied with each kit.
Fitting Rear Rollers.
1.
Raise appliance from floor by approx. 75mm
using suitable lifting equipment (i.e. Palletiser /
Forklift) to allow rear adjustable feet to be
removed.
2.
Unscrew and remove both rear adjustable feet
from rear leg housings.
3.
Fit rear roller to rear leg housing and align screw
hole in side of rear leg housing with threaded
hole in rear roller.
4.
Secure rear roller to leg support with bolt
supplied and tighten bolt using a 10mm A/F
spanner.
5.
Fit second roller and tighten.
6.
Lower the appliance back to the floor and adjust
the front adjustable feet to level the appliance.
Combustible Surface
Non Combustible Surface
Left / Right hand side
50mm
0mm
Rear
50mm
0mm
Fig 1
Appliance
Base
Adjustable
Foot
Rear Roller
Assy
Rear Leg
Housing
Roller
Locating Bolt