Additional Modes
175
Iridium Manual
4)
Tap on the
Update
button on the
System
tab pa-
ge (
Info
tab).
5)
Locate the MicroSD card or the USB storage de-
vice and select the iridium.update.bin file. Tap on
Load
.
6)
Follow the onscreen instruction.
7)
Wait until the operation is completed. If updating
was successful, Iridium will perform a system re-
set and start up.
s
Do not under any circumstances turn off the Iri-
dium while the update step is in progress. A com-
plete loss of data may occur and it will be impos-
sible for you to make your machine work again!
Working with the Pads
The 16 RGB colored pads can be set up for different purpo-
ses. This depends on the pressed button left from the pad
section.
r
Keep in mind that each layer has its own pad confi-
guration. The pads will have the pad configuration of
the active layer. Everything will be saved with a
patch.
The pads can be used to play live or to setup latch patterns
to be auto-played in one of three modes:
1. Arpeggiator: The arpeggiator will take the pitches from
the latched pads as basis for the arp algorithm. Chords will
be broken into their constituent notes.
2. Sequencer: The last hold or latched pad will trigger the
sequencer and determine its transposition much as you
would do it from a normal keyboard.
3. Trigger Mode: The pads will be wandered according to
the trigger algorithm. Chords will be kept as chords. If no
note is latched, all pads will be used. If notes are latched,
they will be played but for the others rested.
Summary of Contents for IRIDIUM
Page 1: ...User Manual...
