Waldorf IRIDIUM, User Manual

Page: 148 / 215

Additional Modes
148 Iridium Manual
The Sequencer in Velocity mode
Seq Length
Determines the length of the step sequence. A sequence
must contain a minimum of one step. You can set up to 32
steps.
RelGate (Release Gate)
With the settings of the pop-up menu RelGate you can
determine the note length depending on the original
length. The lower the value, the shorter the played notes.
Mode
Here you can switch between the Sequencer and the Ar-
peggiator mode.
Mode is available on the Arpeggiator page
and the Sequencer page. You can also select the Parameter
Sequencer and the Trigger Pads. Read more on this later in
this manual.
Direction
Sets the direction that is used to play back the sequence:
•
If Forward is selected, the notes are running from the
first step to the last. Then the sequence is repeated.
•
If Backwards is selected, the notes are running from the
last step to the first. Then the sequence is repeated.
•
If Ping-Pong is selected, the notes are running from the
first step to the last, then back to the first note and so
on.
•
If Forw-Back is selected, the notes are running from the
first step to the last. The last step is repeated and the
sequence is running back to the first note, which also is
repeated and so on.
•
If One-Shot is selected, the notes are running from the
first step to the last. Then the sequence stops.