Waldorf IRIDIUM, User Manual

Page: 87 / 215

Sound Parameters
87 Iridium Manual
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Link Mode
See corresponding description in the ‘Filter Panel Parame-
ters’ chapter.
Tap on Link Mode to open a pop-up menu for selection.
•
Set Default : sets Link Mode to its default Single setting.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Routing
Determines the routing of the audio signal that comes from
the oscillators.
•
Former -> Filter : the audio signal first leads into the
Digital Former section and from there into the Dual
Filter section.
•
Filter -> Former : the audio signal first leads into the
Dual Filter section and from there into the Digital
Former section.
•
Parallel : the audio signal is routed in equal parts to the
Digital Former section as well as into the Dual Filter
section. This enables simultaneous parallel processing.
Tap on Routing to open a pop-up menu for selection:
•
Set Default : sets Routing to its default setting Filter ->
Former.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
State
Determines the state of the corresponding filter. When set
to
Active , the filter works in normal condition. If set to
Bypass , the filter is bypassed but Level and Pan can still be
controlled. If set to Off , the filter is completley deactivated.
Tap on State to open a pop-up menu for selection.
•
Set Default : sets State to its default setting Active.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.