Sound Parameters
126
Iridium Manual
3)
You can also select one of the six modulation
sources in the display. Turn the corresponding
dial (e.g. wheel) to select the desired modulation
amount.
4)
You can add other modulation assignments by
repeating step 2. Any assignment will be shown
in the display by its
Source
, its
Amount
and the
Destination
.
5)
Amounts can be changed at any time by turning
the corresponding modulation source dial.
r
Keep in mind that you can set up positive or negati-
ve modulation amounts. Positive amounts will be
shown as as green bar while negatives will be shown
as a red bar. The same goes for the LEDs below the
corresponding modulation source.
The Modulation Assignment window includes some more
options:
•
Clear Selected
button: tap on the desired modulation
entry to select it. Tap on the
Clear Selected
button to
delete the selected modulation assignment.
•
Clear All
button: tap on this button to delete all modu-
lation assignments that are shown in this list.
•
Go to Matrix
button: tap on this button to open the
Modulation Matrix. Read more on this in the next chap-
ter.
•
Close
button: closes the Modulation Assignment
window. Already made modulation assignments will
not be deleted.
Modulation Matrix Display Page
To access the Modulation Matrix display page press the
MOD button. Tap on the
Modulation Matrix
tab on the
touchscreen to select the display page.
Summary of Contents for IRIDIUM
Page 1: ...User Manual...