8
Installation
Fitting Rear Rollers.
1.
Raise the appliance from the floor by approx.
75 mm using suitable lifting equipment (i.e.
Palletiser / Forklift) to allow the rear
adjustable feet to be removed.
2.
Unscrew and remove both the rear
adjustable feet from the rear leg housings.
3.
Fit the rear roller to the rear leg housing and
align the screw hole in the side of the rear
leg housing with the threaded hole in the
rear roller.
4.
Secure the rear roller to the leg support with
the bolt supplied and tighten the bolt using a
10 mm A/F spanner.
5.
Fit the second roller and tighten.
6.
Lower the appliance back to the floor and
adjust the front adjustable feet to level the
appliance.
Fig 1
Appliance
Base
Adjustable
Foot
Rear Roller
Assy
Rear Leg
Housing
Roller
Locating Bolt
