26
Functions
ENG
5.8 Cyclical sending of data
Prerequisite:
The VLD telegram has been
activated in the LIGHT ADMIN app.
NOTE:
Action by the user is not required.
The wireless module transmits certain data
via the following bidirectional VLD telegram
at regular intervals:
EEP: D2-41-00
The interval can be set in the LIGHT ADMIN
app.
The VLD telegram transmits the following
data among others:
Lighting per luminaire head
- On/off
- Dimming value
- Colour temperature
- VTL mode (On/off, Owl, Lark)
- Lighting mode (work lighting with
light control/ service lifting without
light control)
Presence per luminaire head
- Presence
- Workplace assignment/zone
assignment
Ambient conditions
- Noise level
- Air quality (VOC)
- Ambient brightness
- Temperature
- Air humidity
A taught gateway can receive the data and
process these for the building automation.
NOTE:
The luminaire maintenance data
are
not transmitted cyclically. A separate com-
mand via the gateway is recommended for
reading out the maintenance data.
5.9 EnOcean remote manage-
ment
The wireless module supports remote
management according to EnOcean spec-
ification.
With its EnOcean QR code, the wireless
module can be identified and controlled via
a compatible gateway.
The EnOcean QR code is attached to the
wireless module itself and to the outside
of the device in which the wireless module
is installed, see chapter 4.1 “Attaching the
5.10 Updating firmware
The firmware of the wireless module is
updated via the LIGHT ADMIN app.