31
Communicating with an external receiver
ENG
7.2 Sending a teach-in telegram
There are two profiles saved in the wire-
less module. Each profile uses a certain
teach-in telegram, see chapter 7.1 “Check-
ing the profile settings of the wireless mod-
ule”, page 30.
To be taught, the wireless module must
send the matching teach-in telegram to the
external EnOcean receiver.
NOTE:
The function can be carried out in
the same way using the teach-in key on the
luminaire head or on the KIRK ceiling sen-
sor. The function with the wireless module
key is described below.
Prerequisites:
The external EnOcean receiver is in
teach-in mode, see the documenta-
tion included with the device.
The luminaire is connected to the
power supply.
If necessary: the wireless module is
accessible, see chapter 4.3 “Opening
X
To use profile 1, press key
C
briefly
once, see Fig. 1.
X
To use profile 2, press key
C
briefly
twice, see Fig. 1.
The wireless module sends the teach-in
telegram for the corresponding profile.
LED
B
flashes according to the number
of teach-in telegrams sent.
The wireless module has been taught
to the external receiver.
X
If the service flap of the luminaire is
open: Close the service flap, see chap-
ter 4.6 “Closing the service flap”, page
23.
8. Updating firmware
8.1 Updating firmware | Via the
LIGHT ADMIN app
The LIGHT ADMIN app indicates when
there is a firmware update available for a
luminaire.
X
Carry out a firmware update using the
LIGHT ADMIN app.
