30
Communicating with an external receiver
ENG
X
To deactivate the service lighting pre-
maturely, press the left-hand key of the
wireless transmitter at the top.
6.4 Controlling a luminaire and
reading out data via a gate-
way
Control and data query depend on the gate-
way used.
Prerequisites:
Communication takes place
via the VLD telegram.
X
Consult the gateway application doc-
umentation to find out how you can
control the luminaire or read out lumi-
naire data.
7. Communicating with an
external receiver
A luminaire can communicate with any
number of wireless transmitters. No list is
stored showing which receivers the wire-
less module has been taught to.
EXCEPTION:
In the case of bidirectional
communication (VLD telegram), the remote
terminal is transmitter and receiver at the
same time and is saved on the device list.
7.1 Checking the profile settings
of the wireless module
There are two profiles saved in the wire-
less module. Each profile uses a certain
teach-in telegram:
RPS telegram (classical switch tele-
gram)
The teach-in telegram for switches is
sent 3 times in quick succession.
VLD telegram.
The bidirectional UTE teach-in telegram
is used according to EnOcean specifi-
cation.
NOTE:
Different options can be selected
in the LIGHT ADMIN app for the RPS tele-
gram and the VLD telegram. These define
the conditions under which the wireless
module sends a telegram. Teach-in works
with each of the available options.
X
Take a look in the LIGHT ADMIN app
to see what is stored in profile 1 and
profile 2.
X
If necessary, change profile 1 or pro-
file 2 in the LIGHT ADMIN app.
