24
25
Choosing from a List
Selecting the type of sensor, the units of measure of an input, or the control mode used for an output, the selection is
picked from a list of available options. Use the Page Up or Down keys to highlight the desired option, and then use
the Enter key to store the new option into memory, or use the Return key to leave the option at its previous value and
go back.
Hand-Off-Auto Relay Mode
Use the Left or Right Move Cursor keys to highlight the desired relay mode. In Hand mode the relay is forced on for
a specified amount of time and when that time is up the relay returns to its previous mode, in Off mode the relay is
always off until taken out of Off mode, and in Auto mode the relay is responding to control set points. Use the Confirm
key to accept the option, or the Return key to leave the option at its previous value and go back.
Interlock and Force On Menus
To select which outputs to force on, or which outputs to be interlocked, use the Move Cursor key to highlight the output
to be selected, then use the Make Character Higher or Lower keys to check or uncheck that output. When finished, press
the Confirm key to accept the changes or the Cancel key to leave the selections at the previous settings and go back.
4.5 Startup
Initial Startup
After having mounted the enclosure and wired the unit, the controller is ready to be started. Plug in the controller and
turn on the power switch to supply power to the unit. The display will briefly show the model number and then revert
to the normal summary display. Press the Home key if necessary to get to the Home screen. Refer to section 5 below
for more details on each of the settings.
Settings Menu (see section 5.4)
Choose language
Press the Configuration Settings key. Press the Enter key. Press the Scroll Down key until the English word “Language”
is highlighted. Press the Enter key. Press the Scroll Down key until your language is highlighted. Press the Confirm key
to change all menus to your language.
Set date (if necessary)
Press the Scroll Up key until Date is highlighted. Press the Enter key. Press the Move Cursor key to highlight the
Day, and then use the Make Character Higher or Lower keys to change the date. Press the Confirm key to accept the
change.
Set time (if necessary)
Press the Scroll Down key until Time is highlighted. Press the Enter key. Press the Move Cursor key to highlight the
HH (hour) and/or MM (minute), then use the Make Character Higher or Lower keys to change the time. Press the Con-
firm key to accept the change.
Set global units of measure
Press the Scroll Down key until Global Units is highlighted. Press the Enter key. Press the Scroll Down key until the
desired units is highlighted. Press the Confirm key to accept the change.
Set temperature units of measure
Press the Scroll Down key until Temp Units is highlighted. Press the Enter key. Press the Scroll Down key until the
desired units is highlighted. Press the Confirm key to accept the change.
Press the Home key. Press the Inputs key.
CONFIG
Alarms (1)
Sensor (S1)
Temp (S2)
Config > Global Settings
>>
CONFIG
Security Settings
>
>
Date 2017-Mar-22
Time 15:49:16
Global Settings
Additional Config Settings:
Display Settings
File Utilities
Controller Details
Config > Security Settings
>>
Controller Log Out
Security
Config > Display Settings
>>
Home 1
Home 2
Config > File Utilities
>>
File Transfer Status
Export Event Log
Config > Controller Details
>>
Controller
Product Name
Additional Global Settings:
Global Units
Temperature Units
Alarm Delay
HVAC Modes
Language
Local Password
Additional Security Settings:
Adjust Display
Key Beep
Additional Display Settings:
Import User Config File
Export User Config File
Export System Log
Restore Default Config
Software Upgrade
Additional File Utilities:
Control Board
Software Version
Sensor Board
Software Version
Power Board
Battery Power
Internal Temp 1
Internal Temp 2
Additional Controller Details:
