356.805.003
7
Date: 2019-04-04
Area of use
WARNING! To reduce the risk of electric shock or injury: Use indoors only!
WARNING! To reduce the risk of injury: Do not exceed the load limits!
The product is intended for indoor use only. It is designed to move lights or scenic elements up
and down in the stage sphere at the weight and speed stated in "Technical Data". Any other use
of the product may result in a risk of injury of persons or equipment damage.
Exceeding the load rating may cause risk of injury and failure of the equipment. Do not modify the
product and always consult Wahlberg Motion Design if in doubt.
It is the customers' responsibility that any local restrictions concerning the use of the product are
fulfilled.
Using for the first time
WARNING! Read “Safety Information” on page
2 before installing, powering, operating, or
servicing the product. Before applying power:
−
Check the Wahlberg Motion Design website at
documentation and technical information about the product. Wahlberg user manual revisions
are identified by the revision number at the bottom of each page.
−
Check that the local AC mains power source is within the voltage and frequency ranges specified
on the rating label, and/or selected on a voltage/frequency range switch when applicable.
−
See “Power cables and power plug” on page
10. Install a Neutrik powerCON TRUE1 NAC3FX-W(-
TOP) appliance input connector on a suitable power cord. When using a mains power outlet,
also install a suitable power plug on the power cord.
Transport
IMPORTANT! The product must be protected from environmental factors such as physical
shocks and vibration during transportation!
Use only the original packaging, flight case, or pallet frame for protecting the product during
transport. Contact Wahlberg for enquiries regarding flight cases or pallet frames.
