356.805.003
8
Date: 2019-04-04
Physical installation
WARNING! The track must be fastened to a flat surface such as a wall or clamped to a truss or
similar structure. Do not apply power to the product if it is not securely fastened!
WARNING! A track shall be secured with minimum one clamp at each track joint and where the
track ends, including each running meter of a solid track!
Fastening the tracks to a surface or truss
The track system is based on the Tripple E UniBeam system, and the standard product comes in
steps of 1m up to 6m, or the length can be customized on request.
The tracks shall be positioned only vertically and fastened to a flat surface such as a wall or truss.
Check that the entire surface can support at least 10 times the weight of all the equipment to be
installed on it, and that the installation respects all locally applicable regulations.
As a common rule, a track shall always be secured with minimum one clamp at each track joint
and where the track ends, including each running meter of a solid track. However, this may vary
depending on the weight and distribution of the load. Consult Wahlberg Motions Design for
further guidance and customized solutions like floor stands or multiple units on the same track.
Accessories
The following parts are not included the Track Runner Upright and shall be ordered separately.
343.701 1m Track
[A]
343.702 2m Track
343.703 3m Track
343.704 4m Track
343.705 5m Track
343.706 6m Track
Or customized lengths
on request, straight or
curved(pending).
344.703 Connection bracket
[B]
(Join two or
more sections of tracks).
344.702 Bracket
[C]
with Manfrotto clamp for
pipe or truss mount 42-52mm.
244.704 End cover
[D]
(Mechanical end stop
and cover).
344.710 Adjustment tool
[E]
for aligning the
gear rack across
tracks joints
186 Wireless transmitter
