356.805.003
15
Date: 2019-04-04
Changing transmitter station
To change the transmitter station:
1.
Press the
”LINK SW” button
for minimum 3s and until
all the LED’s
RF LINK, LINKED, DMX
and STATUS(STAT) turns off.
2.
Press the “LINK SW” button shortly (<½s) on another DMX transmitter
station.
3.
Secondly press
the “LINK SW” button shortly (<½s) on the TrackRunner Upright within the
next 10s.
Selecting wireless mode (Factory default)
By default, the wireless transmitter is in transmitter mode, and the TrackRunner Upright is in
receiver mode. If needed follow this instruction to re-initialize the correct operation mode of the
receiver and transmitters:
1.
Press the
”LINK SW” button
shortly (<½s) five times, followed by minimum 3s press and the
unit goes into setup mode(changing operation mode).
2.
Within the next 15s you may press the
“LINK SW” button shortly (<½s)
to switch between
the following two operation modes.
a.
Fast flashing: Receiver mode
b.
Slow flashing: Transmitter mode
3.
Finally, to store the selected mode press
“LINK SW” button
for minimum 3s until the STAT
LED stops flashing, and the unit is now ready for use.
