4
.2
4
.2
Connecting Your Freedom Collar (cont.)
Connecting Your Freedom
Collar
(cont.)
3
4
5
FOLLOW THE INSTRUCTIONS ON THE NEXT SCREEN
If onboarding multiple collars, we recommend powering up one at a
time, so that there is no confusion about which collar the mobile
app is seeing.
1 . Ensure the collar has a fully charged battery in place.
2.
Wait for blinking blue light to appear.
3.
Tap “
SCAN FOR DEVICES
” button below.
After inserting the battery, the collar will boot up and flash
white lights. The blinking blue lights should appear shortly after
this.
SELECT THE COLLAR THAT WAS FOUND
When the phone finds your collar, you will see this screen. Tap on
the circle next to “Freedom Collar.”
PROCEED TO SETUP WI-FI
A “
SETUP WIFI
” button will appear at the end of the previous step.
Tap this to go to the Setup Wi-Fi screen.
The next step is different between iOS devices and Android
devices. Please be sure to follow the step that applies to your
phone.
BUT THE COLLAR IS BLINKING RED OR GREEN LIGHTS!
THE APP DID NOT FIND MY COLLAR!
You may have inadvertently activated the collar’s self-diagnostic mode
with the button under the clip. Remove the battery, wait a few seconds,
and re-insert it.
If the Wagz App did not find your collar, make sure that Bluetooth is enabled
on your phone. Also make sure that the collar has a charged battery in it and
has not been onboarded already.