Feldbus-Koppler/-Controller • 95
Fieldbus Controller 750-806
WAGO-I/O-SYSTEM 750
DeviceNet
Note
This editor changes parameters in the Controller.
For this reason, ensure that all data is entered consistently either as hexadeci-
mal or decimal. If the data number format is not consistent, data loss can result
up to a total functional failure of the Controller.
3.
Confirm the warning information by clicking on the "Yes" button.
The dialog window "Service Class Instance Attribute Editor" appears.
4.
In the "Description" dialog box select the "Create" utility and enter the
following values in the dialog boxes for the "Object Address":
- "Class":
4
– "Instance": 0
– "Attribute": 1.
Note
Do
not
click on the "ENTER" key, because this will close the dialog window
so that it has to be reopened.
5.
Click on the "Execute" button to create the instance for the dynamic as-
sembly.
If the setting was successful, the fieldbus node will send the instance num-
ber = 100 0.
If a fault has occurred, you will receive a fault message.
