18 Device Description
787-2861 Electronic Circuit Breaker
Manual
Version 1.3.1
Pos: 24 /All e Seri en (Allgemei ne Module)/Ü berschriften/Ebene 2/Anschlüsse - Überschrift 2 @ 4\mod_1240984262656_21.docx @ 31961 @ 2 @ 1
3.2
Connectors
Pos: 25.1 /Serie 787 (EPSITRON)/Wichtige Erläuterungen/Sicher heits- und sonstige Hi nweise/Gefahr/Gefahr: Anschl üsse nicht unter Last ver drahten! @ 23\mod_1435643665495_21.docx @ 184788 @ @ 1
Do not wire connections under load!
The connections can be damaged or electric arcing can be caused by wiring the
device under tension!
Only wire the electrical connections when the device is disconnected from the
power supply!
Pos: 25.2 /Serie 787 (EPSITRON)/Wichtige Erläuterungen/Sicher heits- und sonstige Hi nweise/Achtung/Achtung: Fr eischwingende Leiterenden durch eine g eeignete Z ugentl astung abfangen! (ohne F ederl eiste) @ 23\mod_1435643960160_21.docx @ 184791 @ @ 1
Use strain relief!
Electronic contacts can be damaged by high vibration levels or shock impacts!
Provide appropriate strain relief means to attach and cap any free ends of the
conductors.
Pos: 25.3 /Serie 787 (EPSITRON)/Ger ätebeschrei bung/Anschl üsse/Anschl üsse 787-2861 @ 23\mod_1436337107341_21.docx @ 185598 @ @ 1
Figure 2: Connections
Table 7: Legend for “Connections” Figure
Position Designation
(1)
S2 (signal output)
(2)
V
IN
+
(3)
V
IN
+
(4)
GND
(5)
S1 (control input)
(6)
V
OUT
+
(7)
V
OUT
+
(8)
GND
Pos: 26 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
