765-4102/0100-0000
Commissioning
88
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Table 55: Status of the last Bluetooth® firmware update
Value
Status
0
Ready for operation
1
Firmware file is being checked
2
Firmware update is being performed
Activating the Bluetooth
®
Interface Using the QR Code Displayed
Note
Never use the product in areas where operation of radio equipment is prohibited.
The product contains a radio transmitter that can impair the function of electronic medical
devices such as hearing aids and pacemakers.
Note
Only use the product with Bluetooth
®
if the product has an approval for the specific
country or region.
To enable the Bluetooth
®
interface, you must have the WAGO I/O Field app installed on
the smartphone or tablet. Proceed as follows:
•
A QR appears in the “Information” section of the
Bluetooth®
tab. Scan it with the
smartphone or tablet.
ð
The smartphone or tablet then sends an optical sequence (flash code) to the de-
vice’s integrated light sensor.
ð
The light sensor registers this sequence. If the sequence is recognized as correct, the
Bluetooth
®
interface is enabled, and the product attempts to establish a Bluetooth
®
connection with the smartphone or tablet.
Starting a Bluetooth
®
Firmware Update
Proceed as follows to start a Bluetooth
®
firmware update:
1. Click
Update request
.
ð
A dialog appears for selecting the Bluetooth
®
firmware file.
2. Select the firmware file.
ð
The Bluetooth
®
firmware update starts.
Performing a Reset
Proceed as follows revert a Bluetooth
®
firmware update:
•
Click
Reset
ð
The Bluetooth
®
firmware is reverted and restarts.
Switching the Bluetooth
®
Interface Wireless Transmitter on/off
To switch the Bluetooth
®
interface wireless transmitter on:
•
Slide the
Bluetooth® radio
switch to the right
ð
The Bluetooth
®
interface wireless transmitter switches on.
