WAGO-TO-PASS® 761
Parameterizing
65
761-314 TO-PASS® Mobile, 4 AI
Manual
Version 2.0.0
Pos : 34.27 / Serie 759 ( WAG O-Soft ware)/T O-PASS Konfig urati onssoft ware/ Parametrier ung/ Par ametrierung Q uitti erung @ 3\ mod_1223556447015_21. doc x @ 23741 @ 3 @ 1
7.6.4
Acknowledgement
Acknowledgment is the confirmation that a message has actually been sent to the
recipient. Select the
TO-PASS
®
telecontrol module from the project tree using the
identifier. Select the entry
Acknowledgment
under the option
Special Functions
.
The right side contains the input fields for the waiting time, the number of
repetitions and the response text.
Figure 28: : Configuring the acknowledgment response
Table 31: Configuring the acknowledgement response
Settings
Waiting time
In this field enter the time that the
TO-PASS
®
telecontrol
module waits for an acknowledgement after transmitting an
alarm SMS.
Acknowledgement is in the form of an SMS containing the
configured response text, or a simple call by the recipient to
the
TO-PASS
®
telecontrol module.
The
TO-PASS
®
telecontrol module registers the call.
You then receive an acknowledgement SMS containing the
identifier, the response text and the alarm text.
Repetitions
In this field enter the number of acknowledgement cycles.
If no recipient acknowledges the message of the
TO-PASS
®
telecontrol module, then the entire cycle can be executed
again, allowing the
TO-PASS
®
telecontrol module to inform
the first address once again and to wait for an
acknowledgment.
Response text
In this field enter the SMS acknowledgement text (up to 20
characters).
This input field is available starting with Firmware Version
FW 2.33.
Pos : 34.28 /D okument ati on allgemei n/Gli ederungsel ement e/---Seit enwec hs el--- @ 3\ mod_1221108045078_0. doc x @ 21810 @ @ 1
