92
Diagnostics
WAGO-TO-PASS® 761
761-314 TO-PASS® Mobile, 4 AI
Manual
Version 2.0.0
Pos : 39 /All e Seri en (Allgemei ne Module)/Ü berschrif ten f ür alle Serien/Diag nos e - Ser vice/Diagnos e - Ü bers chrift 1 @ 4\ mod_1240831069471_21.doc x @ 31372 @ 1 @ 1
9
Diagnostics
Pos : 40.1 /Serie 761 (TO- PASS)/ Ser vic e und Diagnos e/Di agnose 761-1xx/-2xx/-3xx Test Ein- und Ausgänge - Ei nleit ung @ 3\ mod_1222849836265_21.doc x @ 22682 @ 2 @ 1
9.1
Test Inputs and Outputs
To test the inputs and outputs select the menu option
Controller > Test I/O
.
The following window is displayed:
Figure 38: Test inputs and outputs
The process values of the inputs are displayed in the upper area and the process
values of the outputs are displayed in the lower area.
Pos : 40.2 /Serie 761 (TO- PASS)/ Ser vic e und Diagnos e/Di agnose 761-1xx/-2xx/-3xx Test Ein- und Ausgänge D I @ 10\ mod_1312971852616_21.doc x @ 76302 @ @ 1
By pressing the buttons
[Output 1]
…
[Output 4]
in the upper area switch digital
inputs on and off.
Pos : 40.3 /Serie 761 (TO- PASS)/ Ser vic e und Diagnos e/Di agnose 761-1xx/-2xx/-3xx Test Ein- und Ausgänge - Ende @ 10\ mod_1312971845334_21. doc x @ 76298 @ @ 1
Click
[OK]
to end the test and close the window.
Alternatively, the inputs and outputs can also be tested with the help of the menu
option
Visualization > Process values
.
Pos : 40.4 /Dokumentation allgemei n/ Glieder ungs elemente/---Seit enwechs el--- @ 3\ mod_1221108045078_0.doc x @ 21810 @ @ 1
