WAGO 757-801 Manual Download Page 14 | Manualshive

Page: 14 / 92

background image

14

Important Notes

WAGO-I/O-SYSTEM 757

757-801 Bluetooth® Module RS-232

Manual

1.0.0

Cleaning only with permitted materials!

Clean soiled contacts using oil-free compressed air or with ethyl alcohol and
leather cloths.

Pos : 25.4 /All e Seri en ( Allgemei ne Module)/ Wic htige Erläut erungen/ Sicherheits- und sons tige Hi nweis e/ Ac htung/ Achtung: Kei n Kont aktspr ay ver wenden! @ 6\ mod_1260181290808_21.doc x @ 46755 @ @ 1

Do not use any contact spray!

Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.

Pos : 25.5 /All e Seri en ( Allgemei ne Module)/ Wic htige Erläut erungen/ Sicherheits- und sons tige Hi nweis e/ Ac htung/ Achtung: Ver polung ver meiden! @ 6\ mod_1260184045744_21. doc x @ 46767 @ @ 1

Do not reverse the polarity of connection lines!

Avoid reverse polarity of data and power supply lines, as this may damage the
devices involved.

Pos : 25.6 /All e Seri en ( Allgemei ne Module)/ Wic htige Erläut erungen/ Sicherheits- und sons tige Hi nweis e/ Ac htung/ Achtung: Elektros tatische Entladung ver mei den! @ 6\mod_1260181364729_21.doc x @ 46759 @ @ 1

Avoid electrostatic discharge!

The devices are equipped with electronic components that you may destroy by
electrostatic discharge when you touch. Pay attention while handling the devices
to good grounding of the environment (persons, job and packing).

Pos : 25.7 /Serie 757 (Funkadapt er I P67)/ Wichtige Erläut erungen/Sic herheits- und sonstige Hinweis e/Achtung/Acht ung: Länge der Z uleit ung der Spannungs versorgung begrenz en @ 14\ mod_1359011579212_21. doc x @ 109757 @ @ 1

Limit the length of the power supply feed line!

The length of the feed line between the power supply unit and the product
connecting cable is limited to ensure proper power supply. Supply voltage
filtering must be provided if the length of the power supply feed line exceeds 3 m.

Pos : 26 /D okument ation allgemei n/ Glieder ungs elemente/---Seit enwechs el--- @ 3\ mod_1221108045078_0. doc x @ 21810 @ @ 1

«
...
12
13
14
15
16
...
»

Summary of Contents for 757-801





























































































Reviews:

No comments

Related manuals for 757-801

Brand: Eaton Pages: 50

Brand: Warner Electric Pages: 3

Brand: iCeeO2 Pages: 7

Brand: SABAF Pages: 6

Brand: VAT Pages: 29

Brand: Balboa Instruments Pages: 19

Brand: CAME Pages: 98

Brand: CAME Pages: 16

Brand: CAME Pages: 8

Brand: Walimex Pro Pages: 68

Brand: IBM Pages: 276

Brand: IBM Pages: 32

Brand: IBM Pages: 157

Brand: ICM Controls Pages: 2

Spartan-3A DSP FPGA Series

Brand: Xilinx Pages: 140

Brand: Zaiput Flow Technologies Pages: 10

Brand: mikroElektronika Pages: 3

Brand: Window Master Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands