WAGO-I/O-SYSTEM 757
Reference AT Commands
71
757-801 Bluetooth® Module RS-232
Manual
1.0.0
Examples
•
Explicit MAC ID:
AT CON TAR ADR = 00:11:22:33:44:55
•
List of trusted devices:
(for index “2”)
AT CON TAR ADR = TRUSTED 2
•
List of found devices:
(for index “1”)
AT CON TAR ADR = FOUND 1
9.4.6.2
AT CON TAR CLEAR
The
AT CON TAR CLEAR
command resets address, port and PIN to the factory
settings.
9.4.6.3
AT CON TAR PIN
This command queries (
AT CON TAR PIN ?
) or determines
(
AT CON TAR PIN = <PIN>
) the PIN used for outbound connections if the
external device uses an older version of the
Bluetooth
®
standard.
Example:
AT CON TAR PIN = 1234
See also section “AT BTSEC PIN”.
9.4.6.4
AT CON TAR PORT
This command queries (
AT CON TAR PORT ?
) or determines
(
AT CON TAR PORT = <port index>
) to which serial port index of the
external device an outbound connection is established. Possible values are
0 … 63. “0” corresponds to the lowest port index offered by the respective device
(equivalent to “auto”).
Example:
AT CON TAR PORT = 0
9.5
Group “AT ECO”: Coexistence Settings
Commands that start with “AT ECO” affect device settings that determine the
coexistence properties of the WSA.
9.5.1
Subgroup “AT ECO BLK”
Commands that start with “AT ECO BLK” concern the radio frequencies of the
WSA used for data transmission.
