WAGO 750-632, Manual, Page: 38 / 152

38 Function Description WAGO-I/O-SYSTEM 750
750-632 Proportional Valve Module
Manual
Version 1.3.0, valid from FW/HW-Version 01/01
5.3.2 “Jog Mode”
In this function, the I/O module changes the setpoint value until an applied signal
is canceled. For example, a drive runs at a fixed speed in a fixed direction until a
corresponding button is released.
Figure 11: Jog Mode
Table 24: Jog Mode
No. Event Description/Behavior
1 Set
SPL_EN
to “0” “Jog mode” is activated.
2 Present current level is maintained.
3 Set
JOG_POS
to “1”
Set JOG_POS to “0”
Present current level is increased.
Present current level is maintained.
4 Set JOG_NEG to “1”
Set
JOG_NEG
to “0”
Present current level is reduced
Present current level is maintained.
5 Set JOG_POS to “1”
Set
JOG_NEG
to “1”
Present current level is maintained.
Do not exceed minimum or maximum values!
As soon as the control value ±100 % has been achieved, no other change occurs.